Your current location: Home >> News >> Technical Information

Briefly describe the core skills of brake pad maintenance

2020-07-25 09:04:19
Times

Brake pad manufacturer product chassis performance testing and maintenance


It is necessary to carefully monitor the suspension and the front axle shaft to see if there is oil leakage. On the flat ground, press your body on the four wheels of the trolley to see if there is any abnormal noise.


The brake pad manufacturers' products and various brake drums of automobile brake pads need to be checked. Contains handbrake system. If it is not a problem, the auto repair shop must remove the dust from the drum brake. The bumpy brake pad products should also be polished and leveled.


If the beautiful car is significantly scratched and scratched, it should be treated with external spraying immediately. Because the effect of lacquer is not only good-looking, its main function is to prevent embroidery. Pick a sunny day and make a whole car waxing to maintain the beautiful car paint surface. For the damaged area, there is no need to carry out polishing several times. It is recommended to do the paint again.


The hard rubber of tires in winter depends on their brittleness. Not only will frictional resistance be reduced, but also steam leaks and tire punctures are easy. Check whether the tires have significant injuries or scratches, and whether the tire pressure is standard. Pay attention to often remove the sundries in the tire pattern, remove and replace the damaged tire. In regions with many glaciers, it is a very good way to apply winter tires.







Don't forget to check the headlights. If the headlights are dim, they must be replaced immediately, and the fog lights cannot be ignored. The brake lights are more likely to be destroyed, so they must be inspected and replaced immediately.


Also pay attention when using glassy cleaning fluid, the most suitable for buying winter products in colder regions.


The windshield wiper takes too long and must be replaced. It often rains in winter, the visibility is not very good, and the windshield vision must be paid attention to.


With the change of temperature, the viscosity of general lubricating oil will also decrease with the weather, and the circulation will be worse. The increased frictional resistance of the car parts will cause the cold start of the car, the energy of the generator will decrease, and even cause the burning of tiles. For safety incidents such as axle suspension, it is most suitable to change the oil in winter.


In winter, the difficulty of starting a car increases, and the battery of an electric car is more likely to lose power. The compound on the battery pole should be eliminated to ensure that the pole touches well and eliminate the risk of not being easy to start. For car buyers who use liquid-filled batteries, the liquid level aspect ratio of the lithium manganese oxide battery should also be checked. If the oil level is less than the standard line, pure water needs to be filled. Cars that do not have enough electricity are most suitable to be sent to the garage for electricity immediately.


Under normal circumstances, the antifreeze is changed every two years. In winter, it is recommended to go to the repair shop to do a freezing point test to determine whether the antifreeze needs to be replaced.


The heating system needs to be checked and repaired in time if there is something wrong.


Brake fluid is safe and should not be sloppy, and good quality winter brake fluid must be replaced. The brake pad manufacturer wishes you a pleasant car experience.


Recently Viewed: